Adaptive Power Systems

APS is a manufacturer and distributor of programmable power test equipment

Adaptive Power Systems (APS) was established in 2003 to manufacture and distribute a line of power conversion equipment to meet world-wide applications.   (See Products Below)

Adaptive Power System products are designed to fill the needs of power conversion for either AC or DC applications. The AC to AC converters provide frequencies and voltages found around the world for both commercial and military avionics or shipboard applications. Each system includes features that customers have asked for over the years. For instance, each unit in the APS product range will accept multiple frequency and voltage inputs, offers fully adjustable output frequency and a broad adjustable voltage range that permits the duplication of any utility power configurations. APS also offers programmable power sources with both AC and DC output modes. The APS frequency changer and AC power source range is available in sizes from 500 VA to 180 kVA.
For DC power requirements, APS offers a broad range of highly efficient and compact programmable AC/DC power supplies for bench or rack mount use ranging from 5000 Watts to 100s of kilo Watts. A constant power voltage ranges offers higher current output at lower voltage settings compared to conventional point rated DC supplies allowing a broader range of applications to be supported by a single power supply. The DCB Series power supplies are bi-directional (source and sink modes) and recycle energy back to the grid when operating in sink (Load) mode.

In addition to AC and DC power sources, APS offers a large number of AC and DC programmable electronic loads from 75W all the way up to 480kW at voltages as high as 1250Vdc or 350Vac L-N to cover a wide range of power test and development applications.


Learn more about this series of Products below or contact us for comprehensive advice.

APS FC300 SeriesAdaptive Power Systems
500VA & 1000VA Models Single Phase 45-450 Hz 0-155Vac / 0-310Vac
CFS300 SeriesAdaptive Power Systems
3 and 6kVA 1 & 3 Phase DC, 40-1000Hz
CGS100 SeriesAdaptive Power Systems
Power 500 VA/W to 4000 VA/W Frequency: 40 - 450 Hz AC: 0 - 155 V / 0 - 310 V DC: 0 - 210 V / 0 - 420 V
CPS100 SeriesAdaptive Power Systems
600 VA/W to 5000 VA/W AC: 0 - 150 V / 0 - 300 V DC: 0 - 212 V / 0 - 424 V
DCB SeriesAdaptive Power Systems
2.5kW to 1080kW Up to 2000Vdc, 1000A 4U Rack Height @ 30kW
DCS SeriesAdaptive Power Systems
5kW to 1080kW Up to 2000Vdc, 1000A 4U Rack Height @ 30kW
Series 3CAdaptive Power Systems
AC & DC Loads Up to 22,500Va Voltage Range, 350Vac/500Vdc Std or 425Vac,/600Vdc Opt Up to 112.5A 40-440Hz
Series 3DAdaptive Power Systems
AC & DC Loads Up to 5625W / 5627VA Voltage Range, 280Vac/400Vdc Up to 18.75Arms DC, 40-700Hz
Series 4Adaptive Power Systems
Modular DC Loads Up to 300W Up to 500V Up to 60A
Series 41SAdaptive Power Systems
Economy DC Loads Up to 700W 80Vdc or 500Vdc Up to 140A
Series 41TAdaptive Power Systems
Modular DC Loads Up to 1600W Turbo Up to 500Vdc Up to 160A
Series 5Adaptive Power Systems
600W, 1200W or 1800W per Chassis Up to 14,400W per Cabinet Current Ranges up to 1000 Adc
Series 5VPAdaptive Power Systems
High Power DC Loads Up to 60kW Up to 1000V Up to 1000A
Series 6RLAdaptive Power Systems
DC Loads up to 2000Vdc 3.1kW to 1080kW Energy Recycling 4U Rack Height @ 30kW
Software LoadsAdaptive Power Systems
Software for APS Electronic Loads