PPS AGX Series Regenerative AC & DC Power Source

Regenerative Test Equipment Saves Energy

The AGX Series is a family of fully regenerative, high power, single, split and three phase, AC, DC and AC+DC output capable Power Sources. Available models range from 6 kVA to 252 kVA. Using a modern user interface for ease of use, the AGX Series is cost effective and fully programmable for both basic frequency conversion and advanced AC power line or DC power test applications. The AGX Series offers extended voltage and frequency ranges and standard analog and digital I/O functions. The optional Electronic Load function returns energy back to the utility, saving utility and HVAC cost when using the AGX for burn in or other load applications

Don't need the regenerative capabilities? Check out the AFX Series, also from Pacific Power Source.

The AGX Series consists of a range of High Power Regenerative AC, DC and AC+DC capable Power Sources covering a power range from 6 kVA to 252 kVA. All AGX models offer single, split and three phase output configurations. The AGX is a state-of-the-art design using the latest Silicon Carbide digital power conversion technologies. Power density is among the highest in the industry allowing 21 kVA/kW of power in only 4U (7″) of rack space.

Great emphasis has been placed on energy efficiency, ease of installation, and maximum power per cubic inch of rack space. Control and operational features provide a high degree of application versatility and ease of use for the test engineer. Applications range from simple, manually controlled frequency conversion to harmonic immunity testing and sophisticated transient simulation.

Power conversion within the AGX Series is achieved by digitally controlled, high frequency pulse width modulation, resulting in cool, quiet and efficient operation. Some AGX models can be upgraded by customer service to provide higher power output using our POWER FLEX upgrade program.

All AGX models are capable of returning full rated power back to the utility grid when testing energy producing EUTs such as wind and solar inverter or bidirectional V2x EV Charging units, Each AGX unit includes standard analog and digital I/O functions, scope function for voltage and current waveform capture, programmable output impedance and harmonic analysis measurements. Frequency range has been expanded to cover 1Hz through 3000Hz (with some power and voltage restrictions) and output voltage range is 350VLN / 606VLL.

• AC Output, DC Output, AC+DC Output
• Fully Regenerative bi-directional power flow supported in all operating modes
• Functions as a Regenerative Grid Simulator for testing Distributed energy resources (DERs)
• DC, 15 to 1,200 Hz Frequency Range full power, 1 to 3000Hz Frequency Range extension
• Single, Constant Power mode 350V LN / 606 VLL / 500 Vdc voltage range offers wider operating range
• Precision True-RMS metering of Volts, Amps, Power, VA, Power Factor and Crest Factor
• Waveform capture scope function for voltage and current on all phases
• Harmonic measurement for voltage and current on all phases
• Extensive Analog and Digital I/O for ATE and system integration
• Available PPSC Manager Windows graphical user interface
• Also compatible with legacy UPC Studio graphical user interface
• 1, 2 or 3 Phase Switch Selectable Output from front panel or bus command
• Sine, Square, Triangle, THD and Arbitrary waveforms
• Line Input 380-480V 3 Phase AC input with Active PFC
• 200 stored programs for both static and dynamic Transient Testing
• Continuous Self Calibration (CSC)
• Precision Voltage Programming – 0.02% with CSC engaged in AC and DC modes
• Standard Models in Power Levels from 6 kVA to 252 kVA. Contact us for higher power.
• Standard RS-232, USB, GPIB and Ethernet Interface with SCPI compatibility
• Option CAN/CAN-FD Bus and ModBus interfaces/li>
• LXI Compliant LAN/Ethernet with embedded web server
• IVI Instruments drivers
• CE (EMC/Safety) and Nemko (Safety) Marks
• POWER FLEX upgrade program allows units to be retrofitted for higher power output

Regenerative Energy Recovery

The bi-directional regenerative capabilities of the AGX Series support testing of green energy, distributed energy producing equipment. In electronic load mode (optional), the AGX will return most of the energy received from the EUT back to the power grid instead of dissipating it.

AC or DC Test Power

The AGX Series Power Source is equipped with multiple high-end Digital Signal Processors to create a fully integrated test system. It supplies a variety of power conditions to the device under test and meters all output performance parameters.

AC+DC Test Power

Special test requirements such the application of a DC offset on an AC line or AC ripple on a DC supply output are supported by selecting the AC+DC Mode of operation.

EMC Compliance Test Power

The AGX Series can also be used as an integral part of our Power Line Emissions and Immunity EMC Test Systems, the ECTS2 Series. These systems are used to test for compliance to IEC Harmonics, Flicker and Immunity for AC power or DC power products that must meet CE mark requirements for export to Europe.

Frequency/Voltage Conversion

The AGX Series is an excellent source of stable AC voltage over the frequency range of 1 to 3,000 Hz. The output frequency is accurate to 0.01%.

Phase Conversion

With the ability to provide singe, split and three-phase outputs, the AGX Series is the perfect choice to provide 1 Phase to 2 or 3 Phase or 3 Phase to 1 Phase conversion.

Controller

The AGX Series controller offers both manual and full programmable control. Front panel operation is menu driven using a combination of direct access menu keys to the left of the large color display and 5 soft keys located on the right of the display. The rotary knob can be used to scroll through menu fields and doubles as an ENTER key. The same knob allows for slewing of output parameters. A full decimal keypad is provided as well for direct parameter entry. The AGX can also be operated remotely from one of its included remote interfaces. Operation from a web browser via LAN or USB is also supported through the embedded web server of the AGX.

Protective Transit Cases for Mobile Applications

Pacific Power Source offers rugged transit cases to protect your AC Source from adverse environmental conditions for mobile and/or military applications.

Specific benefits:

• Environmental Protection (shock, vibration, moisture, heat),
• Unrestricted Equipment Operation,
• Quick Cover Removal & Installation,
• Integrated wheels and Handles,
• Stainless Steel Latches.